|

|
 |
FEATURES AND SPECIFICATIONS:
• Discrete components analog line preamplifiers, wideband and low
feedback;
• Phono preamplifier and tape buffer made with high performance
op-amps;
• Extreme quality passive components: low or very low tolerance metal
film resistors, low tolerance poliestere or polipropylene
non-polarised capacitors, low ESR, high speed high value electrolytic
capacitors, organic dielectric low value electrolytic capacitors.
• Integrated bufferless network resistances volume controls for
highest transparency.
• Switching relays with gold-plated silver contacts. No capacitors on
signal path. Offset correction servo.
• Analog supply with dedicated toroidal transformer, two supply lines
and five independent regulators. |
• Upgradable digital audio decoding board. Dolby Digital EX, Dolby
Pro-Logic II, DTS-ES and DTS Neo:6 compatibility. Decoding algorhythms on
rewritable memory: the algorhythms can be updated or new ones can be
uploaded when available via the provided RS-232 port.
• Eight channels 192kHz/24bits DAC. 192kHz/24bits stereo ADC.
• Low jitter reference clock.
• Upgradable digital audio I/O board. 192/24 coaxial inputs, 96/24 Toslink
optical inputs. Digital tape output with separate bar. The selected analog
source for listening is also available on the digital tape bar via A/D
conversion.
• Digital supply with eight independent regulators.
• Upgradable video processing board. Inputs: composite, s-video, component.
Ouputs: composite, s-video, YCbCr or RGB component with configurable sync,
YPbPr or RGB progressive with configurable sync on either 3xRCA or Dsub-15
(VGA). Four formats available at the same time thanks to a
cross-conversion digital matrix. Unused outputs can be switched off to
reduce digital noise. Video switching with very large bandwidth
solid-state switches. High speed output buffers. Discrete components, high
slope output antialias filter for best matching with digital TV’s or
plasmas.
• Syncs available on RCA’s in various configurations.
• Triple 12bits/54MHz A/D converter. Six 10bits/54MHz D/A converters for
interlaced outputs. Triple 11bits/54MHz D/A converter for progressive
outputs.
• Separate tape bar with composite and s-video outputs. Even the selected
source for vision can be routed to the tape output in order to exploit the
format conversion feature. For example, it is possible to record a
composite signal on a video tape recorder provided with s-video input only.
• Deinterlacing processor with Faroudja DCDi algorhythm.
• On-Screen display apart the video signal path to preserve the best video
quality.
• Low jitter reference clock.
• Video supply with seven independent regulators.
• Multiple concurrent control management: with control panel, with remote
control and with RS-232 port.
• Management system with microcontroller network, 16bits master
controller. Upgradable management software
via RS-232 port.
• Selectable remote control base code to avoid unwanted interferences with
other equipments’ remotes.
• Ir codes taching feature to program universal remotes from the unit or
to recondition the provided remote control after battery brown-out.
• Large size front panel display with complete set-up to configure the
unit when no TV or other display is used. High resolution encoders.
• Provided with Windows PC software for configuration and control. |