|
|  | PHOTOGALLERY |  |
|
|
|
|
CLASS A SE
POWER AMPLIFIER
The Class A Power Amplifier SE comes after a four year period of diligent research that Audio Analogue has been developing on the standard Class A Power Amplifier.
The research, directed towards a perfect tuning of the unit, has concerned both the selection of the passive components (with special attention paid to the capacitors) and several inner wiring strategies. The implemented changes in such areas have permitted the unit to reach a higher level of audio performance.
These improvements previously reserved for only a small group of audiophiles are now available to a wider public with the birth of the Class A Power Amplifier SE. |
Parameter |
Value |
|
|
|
|
Dimensions (Nota1) |
12,6 x 17,5 x 18,1 “ |
|
|
|
|
Weight |
135,6 Lbs |
|
|
|
|
Sensitivity Unbalanced Input (Nota13) |
1 Vrms |
|
|
|
|
Sensitivity Balanced Input (Nota13) |
2 Vrms |
|
|
|
|
THD + N (1W, 8Ohm 1 KHz) |
0,02 % |
|
|
|
|
Slew Rate (Nota11) |
50 V/μs |
|
|
|
|
Frequency Response (Nota2) |
1 Hz - 160 KHz |
|
|
|
|
Noise Level (Nota10) |
-130 dB |
|
|
|
|
SNR (Nota9) |
> 100 dB |
|
|
|
|
Output power (Nota4) |
50W classA / 8Ohm p.c. |
|
|
|
|
|
100W / 4Ohm p.c. |
|
|
|
|
|
200W / 2Ohm p.c. |
|
|
|
|
|
200W / 8Ohm (Bridged Mode) |
|
|
|
|
Inputs |
2 Unbalanced Inputs / 1 Balanced Input |
|
|
|
|
Notes:
Nota 1 - Height x Width x Depth (H x W x D)
Nota 2 - Attenuation 0dB, -3dB Band
Nota 3 - Attenuation: 0dB A weighted reffered to 8 Ohm load nominal power
Nota 4 - 1KHz input signal, two piloted channels
Nota 5 - Band limits 0Hz-40KHz
Nota 6 - Band limits 0Hz-22KHz
Nota 7 - Maximum rms voltage output value
Nota 8 - Attenuation 0dB, -3dB band, 1Vrms output
Nota 9 - Attenuation: 0dB A weighted reffered to 200W
Nota 10 - Band limits 0Hz-48KHz
Nota 11 - Full power Bandwidth limited
Nota 12 - Joined in AC for each phase to the common
Nota 13 - For 200W @ 8Ohm
Nota 14 - Attenuation: 0dB A weighted reffered to 50W
|
