NEWS

Special Edition

EVENTO

State of Art

FEATURES
Two toroidal, 400VA transformer, one per channel. Dual mono design.
Pure class A operation up to 50W @ 8 Ohm.
Only double-sided metallized polypropylene film capacitor in the critical points.
The internal stages are DC coupled and the offset is reduced by means of an integrating amplifiers.
High current capability.
The protection and control sections are galvanically insulated from the analog sections to minimize the digital noise.
No mains fuse. The mains current is measured at the input of the transformer (with a current probe) and in case of malfunctions it's shutted off.
The voltage of both channel is measured by means of optocoupler to avoid any ground loop.
The DC offset on the output (loudspeakers) is also monitored by means of optocouplers.
The protections are realized with a PLD (Programmable Logic Device), more fast and reliable compared to a microcontroller.

Class A PA - Owner's Manual (1.186,3 kb)

Parameter 

Value 

Dimensions (Nota1) 

12,6 x 17,5 x 18,1 “ 

Weight 

135,6 Lbs 

Sensitivity Unbalanced Input (Nota13) 

1 Vrms 

Sensitivity Balanced Input (Nota13) 

2 Vrms 

THD + N (1W, 8Ohm 1 KHz) 

0,02 % 

Slew Rate (Nota11) 

50 V/μs 

Frequency Response (Nota2) 

1 Hz - 160 KHz 

Noise Level (Nota10) 

-130 dB 

SNR (Nota9) 

> 100 dB 

Output power (Nota4) 

50W classA / 8Ohm p.c. 

100W / 4Ohm p.c. 

200W / 2Ohm p.c. 

200W / 8Ohm (Bridged Mode) 

Inputs 

2 Unbalanced Inputs / 1 Balanced Input